Loading ...
Loading ...
Loading ...
Password: Type a valid password to log into the FTP Server.
Remote Directory: Type the name of the storage folder on the FTP Server.
Alerts Interval time in minute: Specify the interval between FTP alerts. The interval
can be between 0 and 60 minutes. The option is useful for frequent event occurrence.
Any event triggers during the interval period will be ignored.
[FTP-Alarm Settings]
Motion Detection: Once motion is detected on the camera, a still image will be sent to
the FTP Server.
~ Continuously send images upon trigger events (Motion): A sequence of
snapshots is uploaded to the FTP Server when motion is detected on the camera.
Digital Input: When the input is triggered, a still image will be sent to the FTP Server.
~ Continuously send images upon trigger events (Input): A sequence of snapshots
is uploaded to the FTP Server when the input is triggered.
Continuously send images: Send messages to the FTP server at the specified interval.
~ Interval: Interval: Use the drop-down list to specify how frequent the images are
sent to the FTP server.
~ FTP Schedule: Select this option to define specific period(s) of time for images to be
sent to the FTP Server. For details on the schedule option, see 4.5 Recording
Schedule Settings. Note this function is only supported by GV-FER5700, GV-
EFER3700 / EFER3700-W Firmware V1.1.4 or later.
~ Enable Recycling: Select this option to recycle the FTP storage at the specified
Keep Day.
~ Keep Days: Specify the number of days after which the images at the FTP server are
recycled. By default, the Keep Day is set to 1.
Important:
1. To send FTP alert upon motions, be sure to set up the detection area on the Motion
Detection page.
2. Digital Input settings are only supported by GV-FE2301 / 4301, GV-FER5700 / 12203
and GV-EFER3700 / EFER3700-W.
120
Loading ...
Loading ...
Loading ...