Loading ...
Loading ...
Loading ...
864036
43
Warning/
information
Indication on the display unit Error cause and description, what to do?
System warning to run the
Drum Clean (Self-cleaning
programme)
After the washing programme is
complete, the signs
and
will alternate on the display unit.
We recommend running the Drum Clean (Self-
cleaning programme).
Warning by the system
for detecting excessive
foaming during the washing
programme.
In case of excessive foaming in the washing
machine or leak of foam through the detergent
dispenser tray, the washed laundry has to be
rinsed thoroughly with a large amount of water.
Choose a washing programme, but do not add
any detergent.
• We recommend choosing the Rinse &
Softening programme.
• Decrease the amount of detergent added.
Power supply failure warning
(»PF«/Power Failure)
The system detected a power supply failure
during the washing programme progress,
which affected functional execution of the
washing programme.
Check the power supply network to which your
washing machine is connected.
Unresponsive display unit and
all buttons
Unplug the power cord from the outlet. Check
if the supply voltage is suitable for the washing
machine (220–240 V); then, plug the power
cord back into the outlet and switch on the
washing machine.
Washing machine standing by,
ready to resume the washing
programme
The time remaining until
programme completion is
alternately lit and off on the
display unit.
To resume the washing programme, press the
(3) button START/PAUSE.
Preparation for unlocking the
door
Signal lights will flash on the
display unit.
Wait until the process is completed. If no error
is indicated after the process, then a new
programme can be started.
Water has to be drained. Wait for the door to
unlock.
Noise and vibration - Make sure the appliance is levelled using the adjustable legs and that the
jam nuts are securely tightened.
Unevenly distributed laundry or lumps of laundry in the washing machine drum can cause problems
such as vibration and noisy operation. The washing machine detects such problems and the UKS*
(*stability control system) will be activated.
Smaller loads (e.g. one towel, one sweater, one bathrobe etc.) or clothes made of materials with
Loading ...
Loading ...
Loading ...