Loading ...
Loading ...
Loading ...
864036
16
For normal washing machine operation, the pressure in the water mains should be between 0.05
and 0.8 MPa (0,5 - 8 bar). Minimum dynamic water pressure can be determined by measuring the
water flow. In 30 seconds, 1.2 litres of water should flow from a fully open tap.
Tighten the water supply hose by hand, firmly enough for the hose to have a good seal (max. 2
Nm). After connecting the hose, the seal must be checked for any leaks. Do not use pliers or similar
tools when connecting the hose as this could damage the nut thread.
Only use the water supply hose supplied with the appliance. Do not use any used or other hoses.
When connecting the water supply hose, make sure to connect it in a way that allows adequate
and unobstructed water supply.
CONNECTING TO WATER SUPPLY
Attach the hose to the water tap by screwing it onto the thread.
A
B
A
AQUA - STOP
(only with some
models)
If an internal tube or
hose is damaged, a
shut-off system is
activated that cuts the
water supply to the
washing machine. In
such case, the control
glass (a) will turn red.
Replace the water
supply hose.
B
REGULAR
CONNECTION
Loading ...
Loading ...
Loading ...