Loading ...
Loading ...
Loading ...
864036
29
SPIN
(SPINNING RATE/DRAIN/PUMP STOP)
To adjust the spinning rate. Every programme (except for Drum Clean
(Self-cleaning programme)) has a preset spinning rate that can be
adjusted by pressing on position (5) SPIN (SPINNING RATE/DRAIN/
PUMP STOP).
If you select draining without spinning, the symbol will appear on the
display unit.
If you select »Pump stop«, the symbol will appear on the display unit.
Select the »Pump stop« function when you wish the laundry to
stay soaked in the water from the last rinse cycle in order to prevent it
from creasing when you are unable to take it from the washing machine
immediately after the washing programme is complete. You may set the
desired spinning rate. To continue the program, press the (3) START/
PAUSE button that is lit. Water will be drained (pumped out) and the final
spin cycle will be run.
WASHING TEMPERATURE
Changing the temperature for the selected program.
Each program has a preset temperature that can be changed by pressing
the position (7) (WASHING TEMPERATURE).
The temperature is displayed on the display unit (8) above the button.
DELAY END
Press on the position (9) DELAY END to delay the programme completion
time by up to 24 hours.
Settings procedure:
• Select the desired programme and extra functions.
• Press the position (9) DELAY END to activate the function.
• Repeatedly press this position to set the desired programme
completion time (with 30-minute increments up to 6 hours, and
1-hour increments thereafter, up to 24 hours.)
• To activate the function, press the (3) START/PAUSE button.
Washing machine starts counting down the set time. When the
countdown reaches the programme duration (e.g. 2:30), the washing
programme starts automatically.
To interrupt or change the programme completion time, press the (1)
ON/OFF button. To quickly cancel the programme completion delay,
press the position(9) DELAY END and hold it for 3 seconds. The washing
programme will resume.
Example of function setting:
It is now 9 PM, and you wish the washing programme to be completed at
6 AM the next morning. In this case, set the DELAY END time to 9 hours.
5
7
9
Loading ...
Loading ...
Loading ...