Loading ...
Loading ...
Loading ...
864036
34
INTERRUPTIONS AND CHANGING
THE PROGRAMME
MANUAL INTERRUPTION
To pause and cancel the washing programme, press the (1) ON/OFF button. Signal lights will
flash on the display. At the same time, the washing machine pumps the water out of the washing
machine drum. When the water is pumped out, washing machine door will be unlocked. If the water
in the washing machine is hot, the washing machine will automatically cool it and pump/drain it out.
PERSONAL SETTINGS
Basic or default settings for each washing programme can also be changed. When you select the
washing programme and Additional functions, the combination can be stored by pressing the (3)
START/PAUSE button and holding it for 3 seconds (the time is counted down on the display unit).
will appear on the display.
The programme will remain stored until it is changed using the same procedure.
Personal settings can also be reset to factory settings in the user menu.
PERSONAL SETTINGS MENU
Switch on the washing machine by pressing the (1) ON/OFF button. Simultaneously press the
(4) FAST and (7) WASHING TEMPERATURE positions to open the Personal Settings Menu.
Signal lights for STEAM and WATER+ will light up on the display unit. Number 1 will appear
on the LED display, which also indicates the settings function. Rotate the programme selector
knob (2) to the left or to the right to choose the function to change. Number 1 indicates sound
settings and number 2 indicates resetting of Personal programme settings to factory defaults. If
the desired settings are not selected in 20 seconds, the programme will automatically return to
main menu. Press the (5) SPIN (SPINNING RATE/DRAIN/PUMP STOP) position to confirm the
desired functions and their settings; press the (4) FAST position to go back one step. Acoustic
signal volume can be set at four levels (0 means the sound is off; 1 means that the button sound is
activated; 2 means low volume, and 3 means high volume). Choose the volume level by rotating the
programme selector knob (2) to the left or to the right. The lowest setting means that the acoustic
signal is switched off.
PAUSE BUTTON
The washing programme can always be stopped by pressing the (3) START/PAUSE button. The
washing programme is temporarily paused when the time remaining until programme completion
is flashing on the display unit. If there is no water in the drum and water temperature is not too
high, then the door will unlock after a certain period of time, and they can be opened. To resume
the washing program, first close the door and then press the key (3) START/PAUSE button.
ADDING/REMOVING LAUNDRY DURING WASHING MACHINE OPERATION
After a certain period of time, the washing machine door can be opened if the water level and
temperature are below a predefined threshold.
If the conditions below are met, then the electronic door lock is released and the washing machine
door can be opened:
Loading ...
Loading ...
Loading ...