Loading ...
Loading ...
Loading ...
864036
41
Problem/
error
Indication on the display unit
and problem description
What to do?
Water heating error Restart the programme. If the error reoccurs,
call a service technician.
Water draining error
Check the following:
• is the pump filter clean,
• is the discharge hose clogged,
• is the drain clogged,
• if the discharge hose placed is placed below
the maximum and above the minimum
height (see chapter »INSTALLATION AND
CONNECTION/ Connecting and securing the
water discharge hose«);
then, press the (3) START/PAUSE button
again. If the error reoccurs, call a service
technician.
Excessive amount of detergent
Too much detergent may cause excessive
foaming in the drum. See description for
.
Water leak detected in the
washing machine area
Turn off the appliance and turn it back on.
If the error reoccurs, call a service technician.
Water level sensor error
Unplug the power cord from the outlet; then,
plug the power cord back into the outlet and
switch on the washing machine.
If the error reoccurs, call a service technician.
Water overflow If there is water in the drum that exceeds a
certain level, and an error is reported on the
display unit, the washing program will be
interrupted and water will be pumped out of
the washing machine. Restart the programme.
If the error reoccurs, call a service technician.
If there is water in the drum that exceeds
a certain level, and an error is reported on
the display unit, while the washing machine
continues to add water, close the water tap
and call a service technician.
Excessive amount of detergent
Too much detergent may cause excessive
foaming in the drum. See description for
.
Motor control error Restart the programme. If the error reoccurs,
call a service technician.
Error while locking the door Door is closed, but it cannot be locked. Switch
off the washing machine. Switch it back on
and restart the washing program.
If the error reoccurs, call a service technician.
Loading ...
Loading ...
Loading ...