Loading ...
Loading ...
Loading ...
864036
33
STEP 5: STARTING THE WASHING PROGRAMME
Press the (3) START/PAUSE button.
3
TIME REMAINING TO PROGRAMME COMPLETION or DELAY END time (if set) will appear on
the display.
Symbols will be lit on the selected functions.
After pressing the (3) START/PAUSE button, the spinning rate can be adjusted (except in the case
of the Drum Clean (Self-cleaning programme) and SPIN (SPINNING RATE/DRAIN/PUMP STOP))
and child lock can be activated or deactivated, while other settings cannot be changed.
If the TIME REMAINING UNTIL PROGRAMME COMPLETION flashes three times on the
display unit, and there is an audible signal, this means that the washing machine door is open or not
closed tightly. Close the washing machine door and press the (3) button START/PAUSE again to
resume the washing programme.
STEP 6: END OF THE WASHING PROGRAMME
The washing machine will indicate the end of the washing programme with an acoustic signal
and will appear on the display until the washing machine switches into low standby mode or
switches off. After 5 minutes, the sign will no longer be displayed.
1. Open the washing machine door.
2. Take the laundry from the drum.
3. Wipe the rubber door gasket and the door glass.
4. Close the door!
5. Shut off the water supply tap.
6. Switch off the washing machine (press the (1) ON/OFF button).
7. Unplug the power cord from the outlet.
1
Loading ...
Loading ...
Loading ...