Hisense WFGC801439VM 3+ Series 8kg Washing Machine

USER ́S OPERATION MANUAL - Page 35

For WFGC801439VM. Series: 3+ Series

PDF File Manual, 52 pages, Read Online | Download pdf file

WFGC801439VM photo
Loading ...
Loading ...
Loading ...
864036
35
water temperature in the drum has to be suitable,
water level in the drum has to be below a certain value.
In order to add or remove laundry from the washing machine during programme operation, proceed
as follows:
1. Press the (3) START/PAUSE button.
2. If all conditions for release of electronic door lock are met, then you can open the washing
machine door and add or remove laundry from the drum.
3. Close the washing machine door!
4. Press the (3) START/PAUSE button.
The washing program will resume.
If you add a considerable amount of laundry during the wash, the laundry could be washed less
effectively, since the washing machine initially sensed a lower weight of the load of laundry and
added a smaller amount of water. Insufficient amount of water relative to the amount of laundry
could also cause damage to the laundry (rubbing of dry laundry),
and washing time can be longer.
Washing time will resume from the point at which the washing programme was interrupted.
ERRORS
In case of an error or fault, the programme will be interrupted.
An acoustic signal will warn about such occurrence (see TROUBLESHOOTING AND ERROR
TABLE), and the error will be indicated on the display unit (E:XX).
POWER SUPPLY FAILURE
In case of a power supply failure, the washing programme is interrupted. When power supply is
restored, the washing programme is resumed from the point at which it was interrupted. Upon
completion of the washing cycle,
/ will alternate on the display unit. This informs the user
about a power supply failure and on the effect on the execution of the washing programme.
Washing time will resume from the point at which the washing programme was interrupted.
OPENING THE DOOR (PAUSE/CANCEL/CHANGE PROGRAMME)
Washing machine door can be opened, if the water level in the machine is low enough and if the
water temperature is not excessively high.
If the washing machine is not connected to the power mains or in case of a power supply failure
during the programme execution, then the washing machine door cannot be opened.
In such case, the washing machine has to be properly connected, or a service technician should be
contacted.
Loading ...
Loading ...
Loading ...