Loading ...
Loading ...
Loading ...
Maintenance
Introduction
WARNING: Before you do any
maintenance work you must read and
understand the safety chapter.
Maintenance schedule
* = The instructions are not given in this operator's
manual.
X = The instructions are given in this operator's manual.
O = Refer to the engine manual for instructions.
Maintenance schedule for the operator
Maintenance
Daily maintenance Maintenance interval in hours
Each
season
Before
use
After
use
25 50 100 250 300 400 500
Lubricate all grease nipples. Re-
fer to
Grease nipple on page 25
.
O
Do a check of the parking brake.
Refer to
To examine and adjust
the parking brake on page 18
.
X
Do a check of the safety system.
Refer to
Safety devices on the
product on page 8
.
X
Make sure that there are no fuel
or oil leaks from the product.
*
Make sure that there are no dam-
ages on the product.
*
Make sure that there are no loose
parts.
*
Do a check for damages on the
cutting deck.
*
Do a check of the tire pressure.
Refer to
Tire pressure on page
20
.
X
Start the engine and blades and
listen for unusual sounds.
*
Clean the inner surface of the
cutting deck. Refer to
To clean
the product on page 18
.
X X
Clean around the engine. * *
Clean around the belts and the
belt pulleys.
* *
Do a check of the battery connec-
tons.
* *
Do a check of the muffler and the
spark arrestor screen.
* *
16 2173 - 002 - 22.08.2023
Loading ...
Loading ...
Loading ...