Loading ...
Loading ...
Loading ...
3. Set the cutting deck in transport position. Refer to
To set the cutting deck in transport position or mow
position on page 13
.
4. Engage the parking brake. Refer to
To engage and
disengage the parking brake on page 12
.
5. Move the throttle lever (A) to ½ throttle position.
A
B
6. Turn the fuel tank valve to select 1 of the 2 fuel
tanks.
7. Set the cutting height. Refer to
To set the cutting
height on page 13
.
8. Press and turn the ignition key to the start position
(B).
9. When the engine starts, immediately release the
ignition key to the run position.
Note: Do not keep the ignition key in the start
position for more than 5 seconds at a time. If the
engine does not start, wait 15 seconds before you try
again.
10. Let the engine run at ½ throttle for 3-5 minutes
before you apply full throttle.
11. Push the throttle control to the full throttle position.
To operate the product
1. Start the engine. Refer to
To start the engine on
page 13
.
2. Disengage the parking brake. Refer to
To engage
and disengage the parking brake on page 12
.
3. Carefully push the 2 control levers forward. The
product will start to move forward. The forward
speed increases the more the 2 control levers are
pushed forward.
4. Carefully pull the 2 control levers rearward. The
product will start to move rearward. The rearward
speed increases the more the 2 control levers are
pulled rearward.
5. Put the 2 control levers in neutral position to
decrease the speed and stop the product.
6. Do the steps that follow to turn left or right when you
go in a forward direction.
a) Pull the left control lever rearward in the direction
of the neutral position to make the product turn
left. The more you pull the left control lever
rearward, the more the product will turn left.
14 2173 - 002 - 22.08.2023
Loading ...
Loading ...
Loading ...