Loading ...
Loading ...
Loading ...
184
201721
Toner NVRAM：A reading error occurs.
1. Reboot the machine.
2. Check if the toner
cartridge has been properly
installed.
3. If the error code
persists, call the service
personnel to replace the
main board.
201722
Toner NVRAM：A writing error occurs.
201723
Toner NVRAM：Write in is normal, but a read
error occurs during comparison.
201724
Toner NVRAM：Both write-in and read are
normal, but an error occurs during comparison.
201730
The wrong NVRAM Address is used.
1. Reboot the machine.
2. If the error code
persists, call the service
personnel to replace the
main board.
202651
Network_INIT_Fail The network initialization
fails.
201801
Backup PDL setting fails.
201802
Backup GDI setting fails
201803
The product will check if the serial numbers of
PDL and GDI are the same while it is starting.
The error will occur if they are different.
205001
Eeng Error _polymotoraction Error: only occurs
on the LPH machine because Polygonmotor
does not run properly.
1. Reboot the machine.
2. If the error code
persists, call the service
personnel to replace the
LPH module.
205101
eEngError_HiVChargerError：is for Hw to avoid
the EP charger error, leading to the EP’s
abnormal power supply, which causes a video
error.
1. Pull out and back the EP
charger repeatedly for at
least 3 times to clean the
corona wire.
2. Reboot the machine.
3. If the error code
persists, replace the EP
charger.
800001
Security chip error
1. Reboot the machine.
2. If the error code
persists, call the service
personnel.
800002
Storage security check error
800003
Memory security check error
Loading ...
Loading ...
Loading ...