Loading ...
Loading ...
Loading ...
148
Reassembling Steps:
1.
Remove the plastic bag, tape, and then press down the Release Arms to pull out
the protective film.
2. Pull up the Release Arms on both ends.
Important!
To avoid damage the drum unit, please install it after removing the
protection cushions. Do not expose the drum unit to light.
Deliver the old drum unit to an approved recycling center.
3. Holding the handle of the Drum Unit, insert the Drum Unit horizontally into the
slot along the top of the support frame on both sides, as shown in the figure.
4. Close the Side Door and then the Manual Tray as shown.
Loading ...
Loading ...
Loading ...