Loading ...
Loading ...
Loading ...
EN-28
Installation Instructions
Electrical Connection
WARNING
This hob must be connected to the main power supply by a suitably qualified
person�
Before connecting the hob to the mains power supply, check that:
•
The domestic wiring system is suitable for the power drawn by the hob.
•
The voltage corresponds to the value given in the Name Plate.
•
The power supply cable sections can withstand the load specified on the Name Plate.
To connect the hob to the main power supply, do not use adapters, reducers,
or branching devices, as they can cause overheating and fire�
The power supply cable must not touch any hot parts and must be positioned
so that its temperature will not exceed 75 ˚C (167 °F) at any point.
Check with an electrician whether the domestic wiring system is suitable
without alterations�
Any alterations must only be made by a qualified electrician�
•
If the cable is damaged or to be replaced, the operation must be carried out the by after-sale
agent with dedicated tools to avoid any accidents.
•
If the appliance is being connected directly to an isolating switch, it must be installed with a
minimum opening of 3 mm (7/64 in.) between contacts.
•
The installer must ensure that the correct electrical connection has been made and that it is
compliant with safety regulations.
•
The cable must not be bent or compressed.
•
The cable must be checked regularly and replaced by authorized technicians only.
L2 L1
Red
Black
Yellow / Green
For Installer
Loading ...
Loading ...
Loading ...