Loading ...
Loading ...
Loading ...
EN-20
Failure Display and Inspection
If an abnormality comes up, the Induction Hob will display error codes as below:
Display Error
Code
Possible Causes Solution
/ / / /
/
Temperature sensor of the
ceramic plate failure.
Contact a qualified technician
or service center for
assistance.
/ / / /
/
Temperature sensor of the
IGBT failure.
Contact a qualified technician
or service center for
assistance.
/
Abnormal supply voltage. Inspect whether power supply
is normal. Switch the power on
if the power supply is normal.
/
High Temperature of
ceramic plate.
Wait for temperature to return
to normal. Touch the
to
restart the unit.
/
Bad Induction Hob heat
radiation.
1. Wait for temperature to
return to normal. Touch the
to restart the unit.
2. Contact a qualified
technician or service center
for assistance.
■ Note:
•
The above are the judgment and inspection of common failures.
WARNING
Do not disassemble the unit by yourself to avoid any dangers and damages to
the Induction Hob�
Loading ...
Loading ...
Loading ...