Loading ...
Loading ...
Loading ...
EN-10
Using the Induction Hob
Timer Function
You can use the timer for any of the 3 methods below:
To set as Reminder. In this case, the timer will not turn any cooking zone off when the
set time is up.
To set time to turn only one cooking zone off when the set time is up.
To set time to turn two or more cooking zones off when the individual set time is up.
■ Note:
•
You can cancel the timer by touching to , or touching and
simultaneously.
will be visible on the display.
•
Touch or control of the “Program Time Control” to decrease or increase timer by
1 minute.
•
Hold or control of the “Program Time Control” to decrease or increase timer by
10 minutes.
For method
1
In standby mode,
1. Touch
or of the cooking zone you require.
2. Wait for the power level to stop flashing.
3. Touch
or of the “Program Time Control” to set the time. (0-99 minutes)
4. It will begin to countdown immediately. The display will show the remaining time.
Alternatively, you can operate the timer in following steps:
•
Touch
or of the “Program Time Control” first, then touch or of the cooking
zone you require without waiting for any indicator to stop flashing.
■ Note:
•
A beep will sound when the timer reaches . will be visible on the display.
Touch any control on the display to stop the beep.
•
The heating will continue until you cancel the operation, or the appliance will shutdown
automatically based on default heating time. (Refer to “Auto Shutdown Protection”)
•
During the countdown, you can change the power level by touching or on the
corresponding cooking zone.
Loading ...
Loading ...
Loading ...