Loading ...
Loading ...
Loading ...
44
PTZ
Table 4-3 PTZ functions settings parameters
Parameter Description
Scan
After setting up scan, the camera automatically scans the configured left border
and right border.
1. In the PTZ Setup list, select Scan, and then click Setup.
Two buttons of Set the left border and Set the right border are displayed.
2. Through the PTZ control panel, move the camera to the left border that you
want and click Set the left border; move the camera to the right border that
you want and click Set the right border. Configuration finished.
3. Click Start to start scanning; click Stop if you want to end scanning.
Preset point
You can quickly move the PTZ camera to the configured presets after configuration.
In the PTZ setup list, select Preset, and then move the camera to the direction that
you want to monitor.
1. Click Preset, and control the PTZ console to turn the camera to the target
monitoring direction.
2. In the Preset box, enter the preset value.
3. Click Add to complete adding preset.
4. In the Preset box, enter the preset value, and then click Go to, the camera
moves to the location of preset. Click Del to delete the preset.
Calling
Tours
The PTZ camera repeats performing tours among the configured presets after
configuration.
1. Click Tour and set up the value of the tour
2. Click Add, and then enter the preset value
3. Click Add Preset or Del Preset to add or delete the presets
You can do this repeatedly to add presets to delete presets from the tour
4. Enter the tour value, and then click Start. The camera starts rotating according
to the configured tour. Click Del to delete the tour.
Loading ...
Loading ...
Loading ...