Loading ...
Loading ...
Loading ...
102
Picture upload
interval
When the Mode is Timing, the upload method should be determined
based on the image upload interval and snapshot interval.
If this interval is longer than snapshot interval, the system uploads the
most recent snapshot. For example, if the interval is 5 seconds and
snapshot interval is 2 seconds, the system sends an upload command
to upload the next snapshot every 5 seconds.
If this interval is shorter than snapshot interval, the system uploads the
snapshot as per the snapshot interval. For example, if the interval is 5
seconds and snapshot interval is 10 seconds, the system uploads the
snapshot every 10 seconds.
When the Mode is Event, the system uploads the snapshot as per the
snapshot interval.
You can change the Interval and Mode.
Channel Select the channel that you want to apply the FTP settings.
Day
Select the week day and set the time period that you want to upload the
recording files. You can set two periods for each week.
Select the record type (Alarm, MD, and General) that you want to upload. After
selecting the corresponding recording type next to the corresponding period,
the selected recording type will be uploaded during the configured period.
Period
Click Test to test if the FTP/SFTP server is successfully configured.
The system pops up a message to indicate success or failure.
In case of failure, check the network connection or configuration.
Click OK.
Configuring System
You can configure system information, security management, and vehicle information.
5.8.1 Security
5.8.1.1 Configuring System Service
Select SETTING > SYSTEM > SECURITY > System Service.
Loading ...
Loading ...
Loading ...