Horizon T74 Official Treadmill

User Manual - Page 32

For T74.

PDF File Manual, 34 pages, Download pdf file

Loading ...
Loading ...
Loading ...
54
Cleanlinessof your treadmill and its operation environment will keep maintenance problems and servicecalls to a
minimum. Forthis reason,werecommendthat the following preventivemaintenanceschedulebe followed.
AFTEREACHUSE(DAILY)
Cleanand inspect, following thesesteps:
Turnoff the treadmill with theon/off switch, then unplug the powercord at the waft outlet.
Wipedownthe running belt, deck,motor cover,and consolecasing with a dampcloth. Neverusesolvents,as they
can causedamageto the treadmill.
Inspectthe powercord.If the powercordis damaged,contact HorizonFitness.
Makesure thepowercordis not underneaththe treadmill or in anyother area whereit can becomepinched or cut.
Checkthe tension and alignment of the running belt. Make surethat the treadmill belt will not damageany other
componentson thetreadmill bybeing misaligned.
EVERYWEEK
Cleanunderneaththe treadmill, following thesesteps:
Turnoff the treadmill with theon/off switch, then unplug the powercordat the waft outlet.
Foldthe treadmill into the upright position, makingsure that the locklatch is secure.
Movethe treadmill to a remotelocation.
Wipeor vacuumanydustparticlesor otherobjectsthat mayhaveaccumulatedunderneaththetreadmill.
Returnthe treadmill toits previousposition.
EVERYMONTH-IMPORTANfl
Turnoff the treadmill with the on/offswitch, thenunplug thepowercordat the waftoutlet.
Inspectaft assemblybolts of the machine forproper tightness.
Turnoff the treadmill and wa# 60 seconds.
Removethe motorcover. WaituntilALL LEDlights turn off.
Cleanthe motor and lowerboard area to eliminate any lint or dustparticles that may haveaccumulated.Failureto
do somay result in premature failure ofkeyelectrical components.
Vacuumand wipedownthe belt with a dampcloth. VacuumanyblacUwhite particles that mayaccumulate around
theunit. Theseparticles may accumulate from normaltreadmill use.
EVERY6 MONTHSOR150MILES
It is necessaryto lubricate your treadmifl running deck everysix months
or J50 miles to maintain optimal performanceofyour treadmill. Oncethe
treadmill reaches J50 miles, the console wifl prompt you to lubricate the
treadmill Onlyuselubricant providedbyHorizonFitness!
LU HIC HUH
TURNOFF THETREADMILLwith the on/off switch, then unplug the
powercordat the waftoutlet.
Loosenboththerearrollerbolts. (Forbestresults, placetworemovable
marks on both sides of the frame and note roller position). Once
the belt is loosened,take the bottle of lubricant and apply it to the
entire top surface of the running deck. Tightenboth rear roller bolts
(matching tip the marks forproperposition) to original position.After
you haveapplied lubricant, plug in the powercord, insert the safety
key,start the treadmill and walk on thebe# for two minutes tospread
thelubricant.
Lubricatetheair shockswith Teflonbasedspray.
Oncelubrication is complete,reset theconsolebypressing and holding
'STOP'and Speed'+' buttons for 5 seconds.
RUNNINGBELT
RUNNINGDECK
Pleasecontact HorizonFitness with questionsaboutapplying lubricanttoyour treadmill.
L_
Loading ...
Loading ...