Loading ...
Loading ...
Loading ...
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT4200S/ZT4200S-FC66
PROBLEM CAUSE SOLUTION
The electric zero turn
mower stops driving.
◾
Left / Right paddle requires a “reset”.
◾
Pull the left/right paddles toward the operator and
release them. The mower is ready for driving when
the status indicator shines green.
◾
Failure of electronic components of the
accelerator pedal.
◾
Contact a qualified service technician for repair.
◾
The seat safety interlock system got disconnected
during driving on a rough terrain.
◾
Remove the battery from the mower and disassemble
the seat in the reverse order of the instructions in
section “INSTALLING THE SEAT” in this manual to
make sure that the cable plug is properly connected
to the socket on the bottom of the seat. Reassemble
the seat and follow the instructions in “STARTING
THE ELECTRIC ZERO TURN MOWER” to restart the
mower to see if the mower can be started. If not,
contact a qualified service technician for repair.
◾
The operator’s weight is not evenly distributed on
the seat. The weight of the operator on the seat
must be at least 44 lbs (20 kg) for the seat safety
interlock system to function properly
◾
Sit on the seat properly, pull left/right or both paddles
toward the operator and release them, then the
mower is ready for driving.
◾
Disconnect and attach the battery pack again if
necessary.
◾
The parking-brake pedal is depressed to slow
down the driving speed. Once the parking-brake
pedal is depressed enough but not to the parking
position, the mower will stop.
◾
Follow the instructions in “STARTING THE ELECTRIC
ZERO TURN MOWER” to restart the mower.
The driving mode cannot be
adjusted during driving.
◾
This is a feature of the electric zero turn mower
for safe driving.
◾
The function will activate only when the mower
wheels are stopped.
The electric zero turn
mower fails to start the
blades when the PTO switch
is activated.
PTO Switch icon blinks
◾
The combined Ah of the inserted batteries is less
than 15Ah.
◾
In order to start this mower, EGO batteries totaling
15Ah (2 X BA4200/BA4200T) or more are required.
For best performance, we recommend use of EGO
batteries that total 30Ah or more.
◾
The PTO switch was not pushed down when the
mower was turned off last time.
◾
Push the PTO switch down and then up to restart the
blade motors.
◾
The mower is overloaded at the moment the
blades are starting to rotate, triggering the motor
self-protection.
◾
Start the mower grass cutting in lower blade speed
first and do not accelerate the blade speed until the
blades are rotating successfully.
◾
Under extreme cold weather, the blade motor may
not start successfully due to the low temperature
protection.
◾
Always store the mower and battery in warm
environment. Restart the mower when it is warmed
up. Please do not make repeated attempts under
extreme cold weather which may damage the
machine. Recommended operating temperature is
32°F–104°F (0°C–40°C).
◾
The blade interferes with the deformed mower
deck
◾
Call EGO Customer Service Center
Loading ...
Loading ...
Loading ...