Loading ...
Loading ...
Loading ...
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT4200S/ZT4200S-FC20
LED Lights Icon
Illuminates when the LED headlights/sidelights/rear lights have been turned on.
Auto-Parking Icon
The auto-parking icon will flash when the mower stops driving on a slope, the accelerator pedal is released, and the
operator is off the seat without setting the parking-brake pedal at the braking position. The mower will automatically stop
on the slope using the battery charge to power the electric brake, meanwhile the audio indicator will emit intermittent
beeps.
The auto-parking icon will turn off and the audio indicator will no longer sound as soon as the parking-brake pedal is set
in braking position.
WARNING: When the battery power is depleted, the mower can slide down the slope, which may cause
serious mower damage or personal injury!
USB Icon
Illuminates to indicate that a USB device can be connected after the mower is started correctly.
Load Indicator
Indicates the current load of the mower. When the load is in the ECO range, the mower is under normal load. When
the load is in the PWR range, the mower is under heavy load. When in the CHG range, the mower is in the energy
regeneration mode, such as when braking or driving downhill.
Fuel Gauge
Indicates the average charge capacity of the inserted batteries.
Low-Power Indicator
◾
When the available battery charge is critically low, the mower will go into Limp-Home mode. The low-power indicator
will flash every second. The operator should stop working and drive to the battery charging area as soon as possible.
◾
When the battery is nearly depleted, the low-power indicator will flash every half a second.
Fault Code Indicator
The on-board computer system will take action to protect the operator and the machine when it detects an issue. When
it acts to turn off the machine or a component, it will indicate that a fault has occurred, and that fault code will be shown
on the LCD screen. Please see “FAULT CODE & MOWER STATUS INDICATOR REFERENCE” section in this manual for
reference.
Overload Indicator
When the mower is overloaded, the overload indicator will flash every second. Meanwhile, the mower status indicator
above the LCD screen will flash RED every second. The audio indicator will sound once.
It is recommended that the operator should raise the deck cutting height to reduce the load of the mower when the
overload indicator flashes.
Loading ...
Loading ...
Loading ...