EGO ZT4205S POWER+ 42” Z6 Zero Turn Mower with e-STEER Technology

OPERATOR’S MANUAL - Page 63

For ZT4205S. Also, The document are for others EGO models: ZT4200S, ZT4200S-FC

PDF File Manual, 256 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
6356-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT4200S/ZT4200S-FC
RESETTING THE MOWER TO INITIAL FACTORY SETTING
NOTE: When the resetting is successful, below settings will return
to the initial factory setting:
driving mode
driving speed
calibration of the steering wheel
customized settings from app
1. Insert the battery packs into the battery compartments of the
power unit.
2. Set the parking-brake pedal in the braking position.
3. Press the start/stop button briefly and the LCD screen will
show the “fuel gauge” (see Fig. 32).
4. Press and hold the LED light button and CCS button
simultaneously for more than 5 seconds, the audio indicator will sound once and the mower status indicator over
the LCD screen will flash ORANGE. Resetting is successful.
TRANSPORTING THE MOWER
NOTICE: The mower must be transported on the bottom frame at all
times! Forklift should never come in direct contact with the mower!
We recommend to keep the bottom frame to facilitate the
transportation of the mower later for service.
See “TRANSPORT in this manual for safety instruction before
transporting the mower.
1. Park the mower on a level surface.
2. Raise the cutting deck to the highest position.
3. Position and secure full width ramps to the trailer. Full width
ramps will minimize the risk of the mower’s wheels going off
the side of the ramp.
4. Slowly back the mower onto the ramp and into the trailer
(Fig. 33).
5. Stop the mower and set the parking-brake pedal.
6. Turn off the start/stop button and remove the safety key and battery packs.
7. Secure the mower as needed, using straps or cables to prevent movement during transport.
33
MODE
32
CCS Button
Mower Status Indicator Fuel Gauge
LED Light Button
Loading ...
Loading ...
Loading ...