Loading ...
Loading ...
Loading ...
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT4200S/ZT4200S-FC54
REMOVING THE MOWER DECK
WARNING: Make sure that the mower is properly secured and the parking brake is set before proceeding.
Follow below steps to remove the mower deck from the product first and then perform maintenance.
1. Adjust the deck-height-adjustment lever to the lowest cutting height position.
2. Disconnect both blade motor cables.
3. Place a rug or a mat (similar in size to that of the deck) under the deck to prevent the damage to the deck.
4. Remove the cotter pins and push the shaft pins out. Save both sets for deck re-assembly.
5. Push the deck forward (towards the front wheels) and rotate the suspension linkage counterclockwise to release it
from the deck hooks (Fig. 25a).
6. Push the deck sideways and remove it from under the mower (Fig. 25b).
2
3
1
1.8-2.2Nm
Right side
Left side
25a
Motor Cable
(Wrench Required)
Cotter Pin
Shaft Pin
Suspension Linkage
Loading ...
Loading ...
Loading ...