Loading ...
Loading ...
Loading ...
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT4200S/ZT4200S-FC36
Adjusting the anti-scalp wheels (Fig. 11)
Required tools
◾
one 13 mm wrench (supplied)
◾
one 15 mm wrench (not supplied)
The anti-scalp wheels are designed to minimize the chance of
scalping the lawn when mowing on rough, uneven terrain. After
setting the cutting height, adjust the anti-scalp wheels so they
extend below the deck but do not contact the ground.
The anti-scalp wheels can be set in one of four positions:
Position A: greater than 4” (102 mm) grass cutting height
Position B: 3” – 4” (76 – 102 mm) grass cutting height
Position C: 2” – 3” (51 – 76 mm) grass cutting height
Position D: less than 2” (51 mm) grass cutting height
The anti-scalp wheels are set at Position C by default in production. They are held in place by one nut and lug bolt each.
1. Raise the deck to the desired cutting height.
2. Use the 13 mm wrench to stabilize the nut first and then loosen and remove the lug bolt on the other side using the
15 mm wrench.
3. Move the anti-scalp wheel to the desired position. Then
tighten the lug bolt and nut securely with the wrenches. The
recommended torque for the lug bolts is 22-26 ft-lb (30-35
Nm).
4. Repeat with the other anti-scalp wheel, making sure both
wheels are installed in the same position.
Adjusting the seat (Fig. 12)
DANGER: Be sure the seat is secured to the mower with the
supplied socket-head screws before operating the mower. A seat
that is not secured can cause the operator to lose control of the
mower and result in possible death or serious personal injury.
Adjust the seat position to ensure you are able to make firm
contact with the parking-brake pedal and the accelerator pedal
before operating the mower.
The seat can be adjusted forward and rearward by lifting the seat position adjustment lever under the seat.
1. Lift the seat position adjustment lever and hold it, then move the seat forward or backward to the desired position.
2. Release the seat position adjustment lever and ensure that the seat is locked in position.
The comfort of the seat can also be adjusted with the seat-suspension adjustment knob on the underside of the seat.
Loosen or tighten the adjustment knob as indicated to achieve the most comfortable suspension.
1
2
12
11
Anti-Scalp Wheel
Lug Bolt
Nut
D C B A
Loading ...
Loading ...
Loading ...