Loading ...
Loading ...
Please read the following safety precautions carefully
Please read the following safety precautions
carefully
For much protection, it is strongly
recommended to use photo beam sensor
devices, only with a bit extra cost.
While operating the rolling door opener, always
keep the moving door in sight, and ensure that
nobody, no vehicle below the moving door.
Ignorance of this warning, severe personal
injury or equipment damage may happen.
Please do not operate the opener while a kid or
someone standing by the door. During the
process of operating the opener, in the case of
a kid nearby, the kids should be taken after by
his/her supervisor. Ignorance of this warning,
severe personal injury or equipment damage
may happen.
Children are not allowed to operate the door
opener in case of sever personal injury.
Make sure automatic obstacle detection
function performs well. Please test and set this
function according to the instructions strictly,
and conduct a regular test. If needed,
necessary adjustments should be made.
In the case that people, car or other objectives
below the rolling door, please do not pull the
clutch and operate manually.
In the case of installing wall switch or wall
transmitter, the location of wall switch or wall
transmitter should be beyond the reach of
children.
The rolling door must be well balanced. In the
case that sticking or bending, it is required to
ask qualified installation workers to check and
repair. Do not repair the door or the door opener
arbitrarily, since that there is powerful spring
inside the door, which may cause physical
injury and property loss.
Before installation of door opener, please
remove or unlock the rolling door and
mechanical devices.
The power supply for the rolling door
opener must be connected to standard
220V socket by professionals, and with
sound grounding.
The power must be cut off whenever
mending the opener or opening its cover.
The door opener should be mended by
professionals.
Hands and loose clothes are prohibited
approaching the door or door opener no
matter when.
In the case of automatic closing mode, the
photoelectric protection device must be
installed correctly. The photoelectric
protection device must be tested regularly.
While using the automatic closing function,
the above safety code should be obeyed
strictly.
In case that the door can rebound while
encountering obstacles to open mode, it
should be ensured the obstacle reverse
function be adjusted properly during the
installation of door opener. The debugging
of obstacle reverse must be carried out
repeatedly, if necessary, adjustments may
be made.
Make sure that the rolling garage door is
completely open before entering and
exiting.
Make sure the rolling garage door is
completely closed while leaving.
Loading ...
Loading ...
Loading ...