Loading ...
Loading ...
Loading ...
Picture 13
Picture 12
SET
CO DE
OSC
block
9
close
open
Installation
Checking door closing force
1 Press OPEN button (▲ ) until door up
to the highest position, see picture 12.
2 Place a 100mm x 50mm block below
the door, see picture 13.
3 Press CLOSE (▼ ) to close the door
until the door hits the block and begins
moving reversely until the door is totally
open.
Checking door opening force
1 Remove the block, press CLOSE (▼ )
until the door is completely closed, see
picture 12.
2 Press OPEN (▲ ) to open the door
until the door moves to midway, use
hands to firmly grasp the door bottom,
the door should stop moving up.
In the case that the door does not
backtrack easily when closing, or in the
case that the door stop hardly when
opening, both these two cases
demonstrates that the force is not well
adjusted. Then please follow 7.1, 7.2,
7.3, 7.4 to readjust.
Warning:
When door is closing, if there is
something wrong with torque testing
system, please adjust and retest until
everything meets requirements that
the door can be operated.
Loading ...
Loading ...
Loading ...