Loading ...
Loading ...
Loading ...
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of severe injury or death to persons:
1. READ AND FOLLOW ALL INSTRUCTIONS.
2. Do not permit children either to operate or to play with the opener. Keep remote control In s
location Inaccessible to children.
3. Operate opener only when the door Is In full view end froe from any obstruction. Keep the door In
sight until it Is completely closed. NO ONE SHOULD CROSS THE PATH OF THE MOVING DOOR.
4. Check safety reversal system monthly. See page 30. The garage door MUST reverse on contact
with • one-Inch (or • 2x4 board laid flat) object placed on the floor. If an adjustment Is made to
either the force or the limit of travel, both adjustments may be needed and the safety reversal
system must be checked. Failure to properly adjust the opener may result In severe injury or death.
5. If possible, use the emergency release only when the door Is In a closed position. Caution should
be taken whenever the disconnect cord Is actuated'with the door open. Weak or broken springs
may cause the dour to fall rapidly, causing Injury or death to persons.
6. KEEP GARAGE DOORS PROPERLY BALANCED. See page 3, An Improperly balanced door may not
revenm when required and could result In severe Injury or death. Repairs to cables, spring
eesambllee and other hardware must be made by • professional garage door person.
7. Disconnect the electric power to the garage dour opener before making any repairs or removing the
covers.
8.SAVE THESE INSTRUCTIONS.
Care of Your Opener
Limit end force adjustment controls
Limit Controls Force Controls
I -'Z°)I
AdJU
0.ocatedon,_ele_Ode_na_) (Lmmdon_e _t _ pw_)
Weather conditions may cause some minor
changes In dour operstlon requidng some re-
adjustments, perticulerly during the first year of
operation.
Pages 28 and 29 refer to the limit and force
adjustments. Only a screwdriver is required. Follow
the instrucltonscarefully.
Repeat the safety reverse test (page 30) after any
adjustment of limits or force.
A_U Label
The remote control
The opener must learn the code ofany new remote
control. Page 33 explains how to program your
receiver and how to erase all codes if required. Self
service of your receiver is not recommended. If
service is needed, contact your nearest Sears
Service Center.
The remote control batteP/
The green test light should glow and the opener
shouldoperate when the remote control is activated.
ff the green test lightis dim ordoes not come on,
replace the hattery.
The _2 Volt battery should produce power for at least
a year.
Dlspoee of your old battery properly.
Maintenancd Schedule
Once a Month
Manually operate door. If If is unbalanced or
binding, call for professional garage door service.
Check to be sure door opens & closes fully.
Adjust limitsalxI/or force if necessary.
(See pages 28 and 29.)
Repeat the safety reverse teeL Make any
necessary adjustments (See page 30).
Twice a Year
Check chain tension. Disconnect trolley first.
Adjust If necessary (See page 11).
Once a Year
OII door rollers, beednge end hinges
The openerdoee not require additional
lubrication.
DO not grease the door tracks.
31
Loading ...
Loading ...
Loading ...