Loading ...
Loading ...
Loading ...
Installation Step 9 i
Electrical Requirements
I
[
To reduce the risk of electric shock, your garage
door opener has a grounding type plug with a third
grounding pin. This plug will onlyfit intoa grounding
type outleL
If the plug doesn't fitinto the outlet you have,
contact a qualified electrician to instP!lthe proper
outlet,
To avoid Installation difficulties,
do not nm the opener at thls time.
To prevent electrocution or fire, Installation
end wiring must be In compliance with local
electrical and building codes.
Do NOT use an extension cord, 2-wire adapter,
or change the_plug in any way to :Make it fit
your outleL
Right Wrong
If permanent wiring is required by your local code, refer to the following procedure:
To make a permanent connection through the
7/8' diameter hole in the top of the opener
(according to local code):
• Remove the opener cover screws and set the
cover aside.
• Remove the atlached 3-prong cord.
• Connect the black (line) wire to the screw on the
brass terminal; the white (neutral) wire to the
screw on the salverterminal; and the ground wire
to the green ground screw. The opener must be
grounded.
• Reinstall the cover.
I To avoid Installation difficulties,do not nm the openor at this time. I
Gmen
Ground
WIro
wh;te Wire
Permanent
Wiring
Connections
20
Loading ...
Loading ...
Loading ...