Loading ...
Loading ...
Loading ...
36 31-5000573 Rev. 2
ENGLISH
INSTALLATION INSTRUCTIONS
Electric Wiring and Applications Cont.
Outdoor Machine Digital Tube Display Setting
2. Outdoor Unit Parameter View
SW1 0-3 is used to select the outdoor unit number, To select a different unit; SW3 set to 0-15 (outdoor unit number).
(The host can display the parameters of the other outdoor unit and the indoor unit parameters, and the sub unit only
displays the unit parameter SW1 is 0).
1. The first boot, the first sub search engine, from left to right circular display 1:0, if found a table display 2:01 two table
display 3:012 “3:012” means a total of 3 units of the system, 012 said the address of the machine (“.” the actual display
“=”).
2. Lock machine units, start the search within the machine number, cycle “-in-machine units”, such as “-6-” said the
system connects the 6 station machine.
3. After the search is completed, the display of the machine’s fault code, the machine has no fault when the display is 0.
SW1 SW2 SW3 Function Digital tube LD1 ~ 4 Display
Outdoor
unit
address
0-3
0 0 Display outdoor unit fault
code
External machine bus data transfer fault code. If there is no fault display on the
compressor crankcase heat 6 hour countdown time to form a stopwatch.
Press START (SW5) for 2 s, 1111, into the fault query state, can query the last 10
éäøï÷öòææøõéäøï÷äñçéäøï÷æòçèĩäöëìñêçìöóïäüöèõìäïñøðåèõèäæëåü!ÞÙ¤Üà$¥
plus 1 serial number, each by 1 DOWN (SW7) serial number minus 1; 2 min automatic
exit. Steady state
Press STOP¤Üà&¥éòõ"öçìöóïäü ôøì÷÷ëèö÷ä÷øöòé÷ëèôøèõüö÷òóĩäöëìñê
display; The dial in 13,0,0, press START (SW5) 2 s, 1111, can clear the historical
record of failure
1 0 Display outdoor unit priority
and outdoor unit capacity
LD1: Display priority of outdoor unit
LD2: Display “-”
LD3-4: Display outdoor unit capacity (Horse)
2 0 Display operation mode
and outdoor unit operation
output ratio
LD1 said O: stop C: refrigeration H: heating
LD2-LD4 said: 60 of the ability to express the output of 60%
3 0 Outdoor fan speed 1 345 representation 345 rpm
Press START¤Üà%¥éòõ"ö!!!!èñ÷èõ÷ëèöè÷ö÷ä÷èĩäöëìñê
each by 1 UP (SW4) level of wind speed increased by 1 per level, by 1
DOWN (SW7) wind speed increased by 1 grade; 5min automatically exit
the setting state
Press STOP (SW6) for 2 s, display 0000, quit the set state, stop
4 0 Outdoor fan speed 2
5 0 Frequency converter INV1
current frequency
110 representation 110.0Hz
Press START (SW5) for 2 s, display 1111, enter the set state:
ĩäöëìñêçìöóïäüèäæëäææòõçìñê÷ò÷ëè!UP (SW4) frequency rise
1Hz, every 1 times DOWN (SW7) frequency drop 1Hz; 5min after
automatically quit the set state.
Press STOP (SW6) for 2 s, display 0000, quit the set state, stop
ĩäöëìñêçìöóïäü¤àëèñ÷ëèöüö÷èðìöìñ÷õòøåïè÷ëèæòðóõèööòõìöéòõåìççèñ÷òö÷äõ÷¥
6 0 Frequency coverter INV2
current frequency
Loading ...
Loading ...
Loading ...