Loading ...
Loading ...
Loading ...
9WWW.SENIXTOOLS.COM
Gasoline and its vapors are highly ammable and
explosive. To prevent serious personal injury and
property damage, handle it with care. Keep away from
ignition sources and open ames, handle outdoors
only, do not smoke and wipe up spills immediately.
Always shut off engine before fueling. Never add fuel to
a machine with a running or hot engine. Move at least
30 ft. from refueling site before starting engine. Do not
smoke and stay away from open ames and sparks.
Never operate the unit without the fuel cap securely.
Failure to safely handle fuel could result in serious
personal injury.
Always wear eye, hearing, hand, foot and body
protection to reduce the risk of injury when operating
this unit. Keep all parts of your body away from the
rotating cutting attachment and hot surfaces.
To prevent serious personal injury, avoid arm contact
with the engine while operating the unit. The engine
may be extremely hot.
WARNING:
WARNING:
WARNING:
STOP THE ENGINE:
OPERATING THE TRIMMER
ENGAGE CUTTING HEAD SPOOL/
ENGINE STOP
HOLDING THE UNIT
• Engine housing can become hot during trimmer
operation. Do not rest or place your arm, hand, or
any body part against the engine housing. Extended
contact with the engine housing can result in burns or
other injuries.
• Always position the unit on the operator’s right side.
The use of the unit on the operator’s left side will
expose the user to hot surfaces and can result in
possible burn injury.
• To avoid burns from hot surfaces, never operate unit
with the bottom of the engine above waist level.
• Stand in the operating position (Fig. 11). Stand up
straight. Do not bend over.
• Keep feet apart and rmly planted.
• Hold the shaft grip with the right hand. Keep the right
arm slightly bent.
• Hold the handle with the left hand. Keep the left arm
straight.
• Hold the unit at waist level.
• Position the cutting head a few inches above the
ground.
• Do not over-reach; Keep all parts of your body away
from the rotating cutting attachment and hot surfaces.
• To direct clippings away from you, whenever possible
swing the trimmer in a left to right cutting motion.
There is an embossed arrow on the top of the safety
guard indicating the preferred left to right direction of
trimmer operation.
3. Pull the starter grip /cord until resistance is detected.
Rapidly pull 3 to 5 times or until you hear engine turn
over or begin to start.
4. If engine does not start, release choke by squeezing
throttle trigger and green choke button pops out.
a. Engine is now in the run position.
b. Rapidly pull starter grip/cord until engine starts.
5. Allow the engine to run for 10 seconds,then squeeze
throttle to provide fuel to engine and use for intended
task.
NOTE: The choke button is only used when starting
a cold engine. Never push the choke button in once
the engine has been turned over or run. Otherwise the
engine could be damaged.
Restart a warm engine:
NOTE: DO NOT push choke button in.
1. Make sure the primer bulb has fuel inside.
2. Rapidly pull starter/grip until engine starts.
3. Squeeze throttle to provide fuel to engine.
The cutting head spool will be engaged if the operator
squeezes the throttle lever and then squeezes the
throttle lever release to increase the engine speed.
The engine will stop when depressing the Stop switch in
the “STOP” position.
1. Hold the trimmer with your right hand on the rear
handle and your left hand on the front handle. Keep a
rm grip with both hands while in operation. Trimmer
should be held at a comfortable position with the rear
handle about hip height.
2. Keep your body and feet a safe distance to cutting
head.
3. Squeeze the throttle lever to full speed before cutting.
4. The cutting line should run parallel to the ground
surface.
To stop the engine, depress the STOP switch to the
stop position “STOP”.
NOTE: This Stop switch will come back to the ON
position automatically.
IF ASSISTANCE IS REQUIRED FOR THIS PRODUCT:
Do not return this product to the retail store where it
was purchased. Please call our Customer Service
Department for any issues you may have. For Help
Call: 1-800-261-3981
Stop switch
Throttle lever release
Throttle lever
Loading ...
Loading ...
Loading ...