Loading ...
Loading ...
Loading ...
Using the Soundbar
Sennheiser AMBEO Soundbar System SB02 | 57
Managing room calibration data via the
Sennheiser Smart Control app
After you have performed a room calibration, the Soundbar can use
the data obtained during the calibration to create the best possible
3D spatial sound matched to the environment.
In the Sennheiser Smart Control app, you can activate or deactivate
the Soundbar’s use of this data.
The Soundbar can store different data sets: The data of a calibration
with subwoofer and the data of a calibration without subwoofer.
When the subwoofer connected to the Soundbar is deactivated or
disconnected from the Soundbar, the Soundbar uses the data from a
previous calibration without a subwoofer, if there is one.
To activate/deactivate the use of the room calibration data:
▷ Tap the
Audio button in the Settings menu of the Smart Control
app.
A drop-down list appears.
▷ Tap the
Calibration item in the drop-down list.
▷ In the
Calibrated Sound section, activate or deactivate the use of
room calibration data using the software switch.
If you are using “Dolby Virtualizer”, the use of room calibration data
is automatically deactivated and cannot be activated as long as
“Dolby Virtualizer” is activated (> 60).
Managing a subwoofer via the Sennheiser
Smart Control app
Connecting an AMBEO Sub wirelessly to the Soundbar via the
Sennheiser Smart Control app
If an AMBEO Sub is already connected wirelessly to the Soundbar,
you can connect additional AMBEO Subs wirelessly to the Soundbar
via the Smart Control app.
▷ Make sure that the Soundbar and the AMBEO Sub are connected
to the power supply.
▷ Tap the
Audio button or the System button in the Settings menu
of the Smart Control app.
A drop-down list appears.
▷ Tap the
Subwoofer item in the drop-down list.
▷ Tap
Add a new subwoofer and follow the instructions in the Smart
Control app
Loading ...
Loading ...
Loading ...