Loading ...
Loading ...
Loading ...
Using the Soundbar
Sennheiser AMBEO Soundbar System SB02 | 53
Configuring the network connection via
WiFi or Ethernet
Use the WiFi connection or the Ethernet connection for:
• controlling the Soundbar via the Sennheiser Smart Control app
• streaming via Apple AirPlay, Google Chromecast, Spotify Con-
nect and Tidal Connect
• activating the Alexa and OK Google voice assistants
• downloading firmware updates
Establishing a WiFi connection
To establish a WiFi connection:
▷ Press the Setup button on the Soundbar for approx. 5 seconds.
WPS (WiFi Protected Setup) is activated.
The Soundbar searches for a connection.
▷ Press the WPS button on your router.
The Soundbar connects to the WiFi.
▷ Note that the Soundbar has to be on the same network as the
devices with which the Soundbar is to communicate.
Establishing an Ethernet connection
▷ Make sure that the Ethernet cable is properly connected to the
Soundbar and your network (> 34).
Managing a network connection via the Sennheiser Smart Control
app
▷ Tap the Network button in the Settings menu of the Smart Control
app.
A drop-down list appears.
▷ Depending on the desired connection type, tap the
WiFi or Ether-
net item in the drop-down list.
▷ Adjust the WiFi connection or Ethernet connection as desired.
If you connect the Soundbar to the Internet/Ethernet via cable,
the WiFi function of the Soundbar is automatically deactivated.
If no connection can be established within 2 minutes, the
Soundbar stops searching. If necessary, start the search again.
Router
Setup
Reset
WPS
5s
1 2
Loading ...
Loading ...
Loading ...