Loading ...
Loading ...
Loading ...
Connecting devices to the Soundbar
42 | Sennheiser AMBEO Soundbar System SB02
Starting the calibration
You can start the calibration either via the Sennheiser Smart Control
app or via the Volume + and Volume – buttons on the Soundbar.
The Smart Control app allows you to check the status of the calibra-
tion in progress.
To start the calibration via the Sennheiser Smart Control app:
▷ Open the Smart Control app.
▷ In the
System Calibration section, tap the Start button and follow
the on-screen instructions.
To start the calibration via the Soundbar’s Volume + and Volume –
buttons:
▷ Simultaneously press the Volume
+ and Volume – buttons for
3 seconds.
The calibration process takes several minutes. The calibration of
the Soundbar takes longer if connected subwoofers are cali-
brated as well.
▷ Avoid interfering noises during calibration (open windows, house-
hold appliances, etc.), do not stand too close to the Soundbar and
do not cover the Soundbar’s microphones, as this can falsify the
calibration.
After the calibration is complete, the Soundbar plays a demo
tune.
Canceling the calibration
To cancel the calibration:
▷ Press the Multi-purpose
o button on the Soundbar for 3 seconds.
The LED status bar lights red.
The Soundbar is in an uncalibrated state and has to be recali-
brated.
3s
3s
Loading ...
Loading ...
Loading ...