Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
17
G. For Jumper 180, 251 and 305, every eight holes attach a spring to the
corresponding eyelets; for Jumper 366, every nine holes attach a spring; for Jumper
430, every 11 holes attach a spring. For even distribution of the tension and an
easier assembly, each of the springs should be attached to the opposite sides of
the mat of the frame, I.e. rst A1and then C1, B1t hen D1, etc. In addition to the
previously attached springs, you should have springs at ZERO, A1, A, B1, B, C1, C
and D1 ,as shown in FIGURE 7.
H. Jumper 180/251
Attach a spring to hole 4 of the corresponding eyelet and from there attach a spring
every eight holes. For even distribution of the tension and an easier assembly,
each of the springs should be attached to the opposite sides of the mat/the frame,
i.e. rst 4 then 36, 12 then 44, etc. In addition to the previously attached springs,
you should have springs at 4, 12, 20, 28, 36, 44, and 48.
Jumper 305
Attach a spring to hole 4 of the corresponding eyelet and from there attach a
spring every eight holes. For even distribution of the tension and an easier
assembly, each of the springs should be attached to the opposite sides of the
mat/the frame, i.e. rst 4 then 36,12 then 44, etc. In addition to the previously
attached springs, you should have springs at 4,12, 20, 28, 36, 44, 52 and 60.
Figure 7
Loading ...
Loading ...
Loading ...