Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
16
D. For Jumper 180, count -> 18 holes (Jumper 251 -> 24; Jumper 305 -> 32; Jumper
366 -> 36; Jumper 430 -> 44) from Point ZERO on the top bars and the
corresponding eyelets to move on to Point 18 for Jumper 180 (Jumper 251 -> 24
Jumper 305 -> 32; Jumper 366-> 36; Jumper 430-> 44). Attach a spring to this
point, as shown In FIGURE 6. Now this is Point B.
E. For Jumper 180, count ->9 holes from Point ZERO on the top bars and the corre
sponding eyelets to move on to Point 9. Attach a spring to this point, as shown in
FIGURE 6. ForJumper 251, please count 12 holes to move on to Point 12; for
Jumper 305, please count 16 holes to move on to Point 16. ForJumper 366, please
count 18 holes to move on to Point 18; and forJumper 430 counts 22 holes to
move on to Point 22. Now this is Point A.
F. For Jumper 180 -> 9 holes from Point ZERO on the top bars and the corresponding
eyelets to move on to Point C. For Jumper 251, please count 12 holes from Point
ZERO; for Jumper 305, please count 16 holes; and for Jumper 366, please count 18
holes; and for Jumper 430, please count 22 holes. Attach a spring to this point, as
shown in FIGURE 6. By this time you should have attached four springs to the points
ZERO, A, B, and C. This even distribution of the tension is important for the correct
and easy assembly of the trampoline ma as shown in FIGURE 6.
Figure 6
Loading ...
Loading ...
Loading ...