Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
13
ASSEMBLY INSTRUCTIONS
STEP 1 - Frame Assembly
To assemble the frame, a total of 15 or 20 tube parts are required. All parts with the
same part number are interchangeable and can be used on both the left or right.
To connect the parts, push the thinner end of a tube into the wider end of another
tube. These connections are called connection points. Lay out all parts as shown in
gure 1.1 (Jumper 180/251) and Figure 1.2 (Jumper 305/366/430)
A. Lay out all the frame parts as shown. In this step, pay attention to the order.
B. You must have the following parts:
1. Top bar with leg supports (#3,4 items)
2. Top bar (#4, 4 items)
3. Base (#5, 4 items)
STEP 2 - Assembly of the Support
Push all vertical leg extenders (#6) into the base (#5), as shown in FIGURE 2.
Figure 1.1 Figure 1.2
Figure 2
Loading ...
Loading ...
Loading ...