Loading ...
Loading ...
Loading ...
Replace cap. Rotate cap clockwise until it locks in place.
Cap must be locked in place for proper performance and to
prevent leaking.
Position bottom of tank into unit and press on tank handle to
snap tank into place.
Recovery tank (lower tank)
The recovery tank holds the dirty solutiorl that is picked up from
the carpet.
When the recovery tank is full, the automatic "shut-off'r will
engage (see page 6) and the tank must be emptied.
How to empty
TANK -j
HANDLE
Turn deep cleaner off and disconnect from electrical outlet.
T_-_ prevent p_-_,=sibJe le#lkinqr relr:ove ole_ln solution t;-lrlk by
pressing down on tank handle and pulling forward_ set tank
aside (do not set tank on furniture),
PEDAL
LATCH
Step on handle release pedal and lower handle until it rests or]
the floor.
If cleaning stairs or upholstery, remove hose as shown on
pages 11 and 12,
Rotate recovery tank latches outward (one on each side of tank),
Lift tank off of deep cleaner and carry it to a sink or drain.
Unlatch back part of tank lid and remove lid.
Empty tank. Pour dirty water out from the rear of the tank,
For full suction, it is important that the
recovery tank lid is properly secured before
cleaning.
TABS
The lid replaces Jn a hinge-like manner. Position the front of
lid under tabs on front of tank. Rotate lid down onto tank. Make
sure that the lid is secure on all sides before placing tank on
cleaner.
Replace tank and press down to ensure that it is properly seated
in place.
Rotate latches (one on each side of tank) inward to lock tank
in place.
To continue cle_lrlirlcj st;_lirs or uphob>tery, repl_l(-e ho_e as
shown on pages 11 and 12.
Raise handle tc__upright p_sitiorl and replace upper clean
,_olut klrl tank.
Loading ...
Loading ...
Loading ...