Loading ...
Loading ...
Loading ...
Rei33ove recovery t;:lnk front pane] by sliding it straight up.
Replace panel with converter. Slide converter halfway down
opening until it is firmly in place.
SOLUTION
TUBE
Before connecting tube to cleaner,
make sure black tabs are extended
by pulling tan collar toward tube.
Open door on hood labeled "Stair/Upholstery Cleaning
Connection rr, Press round solution tube t:onneotor onto rourld
projection inside door,
Press connector collar down firmly to ensure that it is fully
connected.
When the solution tube is connected to the deep
cleaner, the nozzle brushes will automatically be
turned off and will not rotate when the deep cleaner is
turned on even if the speed selector is in the HI or LO
position,
Oontinued -Y
For full suction, it is important that the recovery
tank lid is properly secured before cleaning.
The tank lid is replaced in a hinge-like manner. Position front
of lid under tabs on front of tank. Rotate lid dowrl onto tank.
Make sure lid is secure on all sides before cleaning.
Reverse procedure to rerY_ove ho_,e arid solutioll tube.
Raise deep cleaner handle to upright po,>iti_rl.
NOZZLE CONNECTOR
Attach nozzle to connector end of hose by sliding it onto connec-
tor urltil the tab locks it securely.
Toremove nozzle, depress tab while sliding nozzle off connector.
Follow the instructions on pages 13 and 14 for the a ppropriate
cleaning task.
Loading ...
Loading ...
Loading ...