Loading ...
Loading ...
Loading ...
I
Pres _. cord into cord (:lip on back of handle.
Pull cord tightn (Fig, 8),
Attach lower hose holder
HOSE
HOLDER
With front of deep cleaner resting on floor, place 2 projections
on lower hose holder into 2 holes on back of cleaner (Fig 9),
Push screw into hole cind tighten securely with a Phillips screw
driver (Fig 10),
Storing hose and nozzle on rack
NOZZLE CONNECTOR
imm
I END OF HOSE
\
., ,\
TRIGGER
END OF HOSE
HOSE
Stretch hose out and identify ends.
Note: You may find it helpful when storing ttle hose and nozzle
to refer to the information on the back of the deep cleaner
and on the converter end of the hose (Fig. l 1),
A A .... L.h,
m
CORD_
HOOK l"
CLIP 1
?
,2
NOZZLE
CONNECTOR
/
CLIP 1
$1
To store h_>se _n rn{k, beqin by placing nozzle connector end
ofhose (straightend)intoclipI on rack(Fig.12),
4
Secure hose to re, ok at numbered locations as shown,
(Fig. 13)
EXTENSION
HOOK
Converter is stored in area as
shown.
While aligning arrows (Fig. 14)r place extension into bottom of
converter opening; then push converter firmly against deep
cleaner until it snaps into place,
To remover first pull top of corlverter off extension then pull off
bottorll,
Secure solution hose to converter as shown.
Loading ...
Loading ...
Loading ...