Loading ...
Loading ...
Loading ...
Read "Before you begin cleaning" instructions on page 9.
Be sure to check the <leaning _de _n your LiphoJstery. Use
your HOOVER 'SteamVac' deep cleaner only on upholstery
marked "W" or "W/S'L
Attadl hose and solution tube as instructed on pages 1 1 and 12,
Agitator brushes will not rotate while "solution tube" is
connected to deep cleaner.
Fill _lean sdution tank ac__ording to instructions on p;_ge 7 and
8. Use 3 ounces of HOOVER Carpet/Upholstery Deterqent,
Dry hands and plug deep cleaner into a properly grounded
outlet.
Turn deep cleaner on.
Gently press the nozzle onto the fabric. Press the solution
trigger and slowly pull the nozzle over tiqe fabric,
Overlap strokes by one-half inch to help prevent streaking,
Make additional strokes without pressing the trigger to remove
_]2ore moisture.
To dean in corners or creases, lift the nozzle one-half inch from
the fabric and press the solution trigger. Vacuum up the solution
with the nozzle without pressulg the trigger.
\
\
For heavily soiled areas, it may be necessary to repeat the
cleaning process. Make crisscrossing strokes to the original
pattern; overlap each pass.
Make no more than 2 passes with the solution over any one
area to prevent overwetting and damage to fabric.
NOTE: Check the recovery tank for fullness often. Empty
tank if it appears full even if automatic shut-off (pg, 6) has not
engaged.
If additional cleaning is necessary, wait until the upholstery is
completely dry before using the nozzle again.
Storage
Before storing:
Empty solution tank and rinse thoroughly with clean
water,
Replace empty solution tank and turn deep cleaner
ON, Squeeze trigger and push deep cleaner forward
and back several times to expel any solution remaining
in the deep cleaner's system, (Do not use deep
cleaner on wood floors,)
Empty recovery tank and rinse thoroughly with clear]
water,
Allow brushes and underside of deep cleaner to air
dry thoroughly before storing deep cleaner on a
carpeted or wood surface,
Do not store deep cleaner with a full solution tank in
place,
Lubrication
The motor is equipped with bearings which contain sufficient
lubrication for the life of the motor. The addition of lubricant
could cause damage, DO not add lubricant to motor
bearings.
When finished cleaningr follow "After cleaning rr instructions or]
page 8 and "After using stair/upholstery nozzle" instructions on
page 13,
Loading ...
Loading ...