Loading ...
Loading ...
Loading ...
If _you have a problem
Thisappliance was inspectecl thoroughly and was in good
operating condition when it was shipped from the factory,
Ifa minor problem occurs, itusually can be solved quite
easily when the cause is found. Therefore, this check list is
provided for your corlvenience,
Possible cause Possible solution
Machine won't run
1. Not firmly plugged in. 1. Plug unit in firmly.
2. No voltage in wall 2. Check fuse or breaker.
plug.
3. Blown fuseltripped 3. Replace fuse/reset
breaker, breaker.
Low suction
1. Recovery tank lid not
on correctly.
2. Recovery tank full/
automatic shut-off
engaged.
3. Obstruction in hose 3.
on stair/upholstery
nozzle.
4. Recovery tank front 4.
panel not replaced after
stair or upholstery cleaning.
1. Make sure lid is on
securely (page 8).
2. Remove and empty
recovery tank.
Remove hose; clear
obstruction.
Replace recovery tank
front panel (page 12).
Clean solution won't dispense
1. Solution tank not
firmly in place.
2. Solution tank empty.
3. Recovery tank lid
not on correctly.
4. Stair/upholstery
solution tube not
securely fastened.
1. Make sure tank is
securely locked
in position.
2. Refill tank according to
instructions for surface
being cleaned (pages 7 & 8).
3. Make sure lid is firmly in
place (page 8).
4. Make sure tube is
securely fastened
at connection of hood.
Solution tube on stair/upholstery nozzle won't
connect
1. Connector collar 1. Extend black tabs on
pushed forward, connector by pulling
collar toward tube.
Brushes/brush indicator won't rotate during floor
cleaning
1. Indicator screen dirty.
2.
3.
1. Remove clear cover over
indicator and clean screen.
Replace cover (see page 6).
Speed selector on OFF. 2. Move speed selector to LO
or HI.
Solution tube connected 3. Remove stair/upholstery
to "Stair/Upholstery nozzle for floor cleaning.
Cleaning Connection". (see page 12)
Service
To obtain approved HOOVER service and genuine
HOOVER parts, locate the nearest Hoover Factory
Service Center or Authorized Hoover Warranty Ser-
vice Dealer (Depot) by:
checking the Yellow Pages under "VacuurY1
Cleaners - Household" OR -
checking the list of Factory Service Centers
provided with this cleaner OR -
calling 1-800-944-9200 for an automated
referral of authorized service outlet locations
(U.S.only).
Do not send your cleaner to The Hoover Company in
North Canton for service, this will only result in delay,
If further assistance is needed, contact The Hoover
Company Consumer Response Center, North Canton,
Ohio 44720 Phone: 330-499-9499.
In Canada, contact Hoover Canada, Burlington, Ontario
L7R 4A8, Phone: 1-800-263-6376.
Always identify your cleaner by the complete model
number when requesting information or ordering parts,
(The model number appears on the back of the cleaner
handle,)
Loading ...