Loading ...
Loading ...
Loading ...
3. Camera Operations: Full Menu List
00069
Technical > Lens Configuration
Makes settings related to lenses.
Menu item Settings Description
Lens 12pin
On/Off Turns the 12-pin lens interface on/off.
[Note]
If changing this setting while the lens is attached to the
unit, turn the turn off and then on again.
E-Mount Shading
Comp.
Auto/Off Sets whether to compensate for a drop in
peripheral lighting when a compatible lens is
attached.
E-Mt Chro. Aber. Comp.
Auto/Off Sets whether to compensate for chromatic
aberration in peripheral lighting when a
compatible lens is attached.
Technical > Authentication
Makes basic settings related to network authentication.
Menu item Settings Description
User Name (Displays the current user name.) Sets the user name to use for access
authentication.
Set to “admin” by factory default.
Password (*******) Sets the password to use for access
authentication.
Set to “mpc3610” by factory default.
Technical > Network
Makes settings related to the network.
Menu item Settings Description
Setting
LAN/Wireless/Off Turns the network connection on/off.
LAN
DHCP (On/Off) Enables/disables DHCP.
When set to [On], an IP address is automatically
assigned to the unit. To enter the IP address of the
unit manually, set to [Off].
IP Address (DHCP/On: obtain
automatically, DHCP/Off:
192.168.2.50)
Enter the IP address of the unit.
Enabled only when DHCP is [Off].
Subnet Mask (DHCP/On: obtain
automatically, DHCP/Off:
255.255.255.0)
Enter the subnet mask of the unit.
Enabled only when DHCP is [Off].
Technical > Network
Makes settings related to the network.
Menu item Settings Description
Wireless
Network Mode (Access Point/
Station)
Sets the network mode for wireless connections.
Scan Networks (Execute/Cancel) Scans for access points for connection
destinations (execute by selecting Execute).
[Note]
Configurable only when Network Mode is set to Station.
SSID When Network Mode is set to Access Point
Displays the SSID for the wireless connection
to the unit.
When Network Mode is set to Station
Displays/configures the SSID of the
connection destination access point.
[Note]
Valid characters for display and entry:
Alphabetic (A to Z, a to z)
Numeric (0 to 9 -.@—_())
Symbols (!"#$%&'*+,/:;<=>?[\]^`{|}~)
Password When Network Mode is set to Access Point
Displays the password for wireless connection
to the unit.
When Network Mode is set to Station
Displays/configures the password of the
connection destination access point.
[Note]
Valid characters for display and entry:
Alphabetic (A to Z, a to z)
Numeric (0 to 9 -.@—_())
Symbols (!"#$%&'*+,/:;<=>?[\]^`{|}~)
WPS (Execute/Cancel) Starts connection setup using WPS (execute by
selecting Execute).
Channel (Auto(5GHz)/Auto/CH1/
CH2/CH3/CH4/CH5/CH6/CH7/
CH8/CH9/CH10/CH11)
Sets the channel of the access point.
[Notes]
Configurable only when Network Mode is set to
Access Point.
Auto(5GHz) may not be displayed, depending on
the wireless LAN module being used. Check whether
use of the wireless LAN module is supported in your
country/region. For details, refer to the operating
instructions of the wireless LAN module.
Loading ...
Loading ...
Loading ...