Loading ...
Loading ...
Loading ...
3. Camera Operations: User Functions Screen
00042
Functions that can be Assigned to Viewfinder (DVF-EL200) Assignable Buttons A
to C
Assignable Button setting Function State when unit is
powered on
No Assign No assignment –
Color Bars
1)
Turns color bars on/off. Setting retained
AXS Slot Change Switches the active slot when two AXS
memory cards are inserted.
Switches between A and B each time the
button is pressed.
–
SxS Slot Change Switches the active slot when two SxS
memory cards are inserted.
Switches between A and B each time the
button is pressed.
–
Rec Review Executes the Rec Review function. Setting not retained
VF Frame Line Turns superimposition of frame lines on the
viewfinder/monitor screen output image on/
off.
Setting retained
VF Zebra Turns the zebra function of the viewfinder/
monitor screen output image on/off.
Setting retained
VF Status Info Turns the information display on the
viewfinder/monitor screen output image on/
off.
Setting retained
VF Focus Magnifier Turns the focus magnifier function of the
viewfinder on/off.
Setting not retained
Press & Hold for VF Log
2)
Disables the LUT applied to the viewfinder/
monitor screen output image while the button
is pressed, and sets Log image quality without
applying a LUT.
Setting not retained
VF Highlight Clip Ind
2)
Turns the function to display clipped highlight
areas in red in the viewfinder on/off.
Setting retained
VF High/Low Key
2)
Selects the viewfinder output mode.
Switches between High Key (screen for
checking for blown-out highlights) Low
Key (screen for checking for blocked-out
shadows) Off (normal display) each time
the button is pressed.
Setting not retained
VF False Color
2)
Turns the false color function display in a
viewfinder on/off.
Setting retained
Assignable Button setting Function State when unit is
powered on
Picture Cache Rec Turns the picture cache recording function
on/off.
Setting retained
Iris Open (1/16 stop)
3)
Opens the lens iris.
Press and hold to open the iris until fully open.
This function is available when an E mount
lens with power iris is attached.
The setting is in 1/16 stop increments, whereas
the iris indication is in units of 1/3 stop
increments.
–
Iris Close (1/16 stop)
3)
Closes the lens iris.
Press and hold to close the iris until fully
closed.
This function is available when an E mount
lens with power iris is attached.
The setting is in 1/16 stop increments, whereas
the iris indication is in units of 1/3 stop
increments.
–
Rec Starts/stops recording. –
1)
Does not function if the button is pressed when an RM-B170 or other remote control unit is connected and Technical >
System Configuration > RM/RCP Paint Control (page 68) is set to On in the full menu.
2)
Does not function if the button is pressed when Technical > System Configuration > RM/RCP Paint Control (page 68) is
set to On in the full menu.
3)
Does not function if the button is pressed when an RM-B170 or other remote control unit is connected.
Loading ...
Loading ...
Loading ...