Loading ...
Loading ...
$AfE
SAVE THESE mNSTRUCTmON$
Read all instructions before using this appliance. When using gas
or electrical appliances, basic safety precautions should be followed,
including the following:
o Injury to Persons
Could Result
o Instal! Anti-Tip
Device Packed With
Range
o See Installation
Instructions
Remove all parts from the plastic bag
attached to the back of the range and
save packaging tape.
1, Decide
=
,
.
on a Chain
location
that has Washer
no and Screw
electrical
wiring or
plumbing,
With the long screw provided,
anchor the
chain to Chain
Long _k,
the floor or Screw Washe'_ I
Make sure y , : .
the screw
Wall
Plate
is going into the wall plate or stud at
the base of the wall at least 3/4".
Attach the stability chain so that it
lines up with the bracket on the back
of the range.
Before placing range in the counter,
check the factory location of the
stability bracket on the back of the
range. For convenience you can hook
the stability chain in the upper set of
holes, Make sure there is no structural
interference when using the upper set
of holes.
Backguard
models)
Bracket
Optional
Location
Chain
Bracket
Factory
Location
Mainback
t
6,
.
=
.
3
Tug the chain to make sure it is
securely fastened.
Take the Tape
packaging tape
and temporarily
attach the loose
end of the chain to
the rear of the
countertop. Chain
Slide the range
into the counter
leaving enough space behind to
attach the chain to the bracket.
Slip the nearest link of the chain onto
the bracket. Pull to make sure it is as
snug as possible.
Slide the range all the way back. It
is normal to have some slack in the
chain, but it should not be
excessive.
Loading ...
Loading ...
Loading ...