Loading ...
Loading ...
Loading ...
4. Network Functions: Connecting to Other Devices via LAN
51
Gateway
Enter the gateway for the access point.
This setting is available only when DHCP
is set to Off.
DNS Auto
Sets whether to acquire DNS
automatically.
When set to On, the DNS server address
is automatically acquired. This setting is
available only when DHCP is set to On.
Primary DNS Server
Enter the primary DNS server for the
access point.
This setting is available only when DNS
Auto is set to Off.
Secondary DNS Server
Enter the secondary DNS server for the
access point.
This setting is available only when DNS
Auto is set to Off.
6 When finished, select Connect to connect
to the access point.
Connecting manually
1 Perform steps 1 to 3 in “Connecting to an
access point using WPS” (page 50).
2 Select ST Mode Settings >Manual Register
(page 103) >Execute in the Network
menu.
Momentarily, the network (access point)
details screen appears.
3 Configure the following connection
settings.
SSID
Enter the SSID for the connection access
point.
Security
Select the encryption method.
Password
Enter the password for the connection
access point.
DHCP
Set the DHCP setting.
When you set to On, the IP address is
assigned to the camcorder automatically.
To assign the IP address to the
camcorder manually, set to Off.
IP Address
Enter the IP address of the unit.
This setting is available only when DHCP
is set to Off.
Subnet Mask
Enter the subnet mask of the unit.
This setting is available only when DHCP
is set to Off.
Gateway
Enter the address of the gateway.
This setting is available only when DHCP
is set to Off.
DNS Auto
Sets whether to acquire DNS
automatically.
When set to On, the DNS server address
is automatically acquired. This setting is
available only when DHCP is set to On.
Primary DNS Server
Enter the address of the primary DNS
server.
This setting is available only when DNS
Auto is set to Off.
Secondary DNS Server
Enter the address of the secondary DNS
server.
This setting is available only when DNS
Auto is set to Off.
4 When finished, select Connect to connect
to the access point.
Connecting to a Device using a
LAN Cable
You can connect with a device by connecting
the wired LAN connector of the XDCA-FX9
(page 23) attached to the camcorder to a
LAN switch using a LAN cable.
Computer
LAN switch
LAN cable connections and wired LAN
settings
1 Connect the wired LAN connector of the
XDCA-FX9 to a LAN switch using a LAN
cable.
2 Turn the camcorder on.
3 Set Wired LAN >Setting (page 104) in the
Network menu to On.
4 Configure connection settings using
Wired LAN >Detail Settings (page 104) in
the Network menu.
DHCP
Set the DHCP setting.
When you set to On, the IP address is
assigned to the camcorder automatically.
To assign the IP address to the
camcorder manually, set to Off.
IP Address
Enter the IP address of the unit.
This setting is available only when DHCP
is set to Off.
Subnet Mask
Enter the subnet mask of the unit.
This setting is available only when DHCP
is set to Off.
Gateway
Enter the address of the gateway.
This setting is available only when DHCP
is set to Off.
DNS Auto
Sets whether to acquire DNS
automatically.
When set to On, the DNS server address
is automatically acquired. This setting is
available only when DHCP is set to On.
Primary DNS Server
Enter the address of the primary DNS
server.
This setting is available only when DNS
Auto is set to Off.
Secondary DNS Server
Enter the address of the secondary DNS
server.
This setting is available only when DNS
Auto is set to Off.
5 When finished, select Set to apply the
settings.
[Note]
Always select Set after changing the connection
settings. The settings are not applied if Set is not
selected.
Loading ...
Loading ...
Loading ...