Loading ...
Loading ...
Loading ...
6 7
A
1
2
6
3
B
C
8
9
E
F
10
13
12
9
G
14
H
4
6
5
3
A
1
3 4
ENGLISH
4
7
11
9
I
K
J
2
ENGLISH
1
Hardware For Step 1
Description Qty
A
B
C
Pre-installed Screw
Bolt
Flat Washer
2
8
8
IMPORTANT: Do not tighten bolts until step 3 is complete.
•
Remove 2 pre-installed screws (A) and detach MOTOR COVER (1).
•
Open HARDWARE FOR STEP 1.
•
Attach LEFT CONSOLE MAST (3) to BASE FRAME (2) using 4 BOLTS (B)
and 4 FLAT WASHERS (C) from the top and bottom.
•
Attach RIGHT CONSOLE MAST (6) to BASE FRAME (2) using 4 BOLTS (B)
and 4 FLAT WASHERS (C) from the top and bottom.
NOTE: Be careful not to pinch wires while attaching the handlebar.
Hardware For Step 2
Description Qty
E
F
Bolt
Arc Washer
4
4
•
Open HARDWARE FOR STEP 2.
•
Connect the HEART RATE GRIP WIRE (12), discard the wire tie, and tuck the cables
inside the LEFT HANDLE BAR (8) and slide into the CONSOLE BASE (9).
•
Connect the HEART RATE GRIP WIRE (13), discard the wire tie, and tuck the cables
inside the RIGHT HANDLE BAR (10) and slide into the CONSOLE BASE (9).
•
Attach HANDLEBARS (8 & 10) to CONSOLE BASE (9) using 4 BOLTS (E) and 4
CURVED WASHERS (F).
Hardware For Step 3
Description Qty
G
H
Bolt
Arc Washer
4
4
•
Open HARDWARE FOR STEP 3.
•
Attach LEAD WIRE (4) to CONSOLE CABLE (5) and pull lead wire through RIGHT
CONSOLE MAST (6). After pulling the lead wire through the mast, the top of the
console cable should be connected to the MCB (14).
Detach and discard lead wire.
•
Attach CONSOLE BASE (9) to CONSOLE MASTS (3 & 6) using 4 BOLTS (G), and 4
CURVED WASHERS (H).
•
Tighten all bolts from steps 1–3.
•
Install MOTOR COVER (1) using 2 pre-installed SCREWS (A).
Hardware For Step 4
Description Qty
I
J
K
Bolt
Spring Washer
Flat Washer
4
4
4
•
Open HARDWARE FOR STEP 4
•
Connect the CONSOLE CABLES (4) and HEART RATE WIRES (7) to the CONSOLE
(11) and carefully tuck the excess cable into the CONSOLE BASE (9).
•
Attach the CONSOLE (11) to the CONSOLE BASE (9) using 4 BOLTS (I) and 4
SPRING WASHERS (J) and 4 FLAT WASHERS (K).
Loading ...
Loading ...
Loading ...