Loading ...
Loading ...
Loading ...
14
4. Upon pressing the pump trigger hold the trigger for 1 to 2
seconds longer, as larger lumps of solder may need a longer suction
time to clear the barrel and go into the filter.
5. Clean the filter and dampen the sponge frequently during and after
usage to allow better suction power.
6. When the task is finished, deactivate the DESOLDER GUN function
switch. Allow the desoldering gun to cool down before handling for
storage.
Notes:
● Please follow the procedures and tips presented above for more
efficient usage of the desoldering gun.
● Industry recommended tip temperature for soldering is 600 to
610F (315 to 320C) for standard solders and 650 to 700F (340 to
370) for unleaded solders
● The soldering iron and desoldering gun operating temperature is
configurable between 200°C and 480°C
● Because of the difference in the heating element and size of the
soldering iron tip and desoldering gun, the soldering iron will heat
up faster than the desoldering gun. This is normal and does not
have any impact on the system’s performance.
● There will be a slight drop in temperature display once the trigger
of the desoldering gun is used. This is due to rapid intake of air in
which temperature is significantly cooler than the desoldering gun
tip. When the system detects this, it will automatically adjust the
NOTICE: When using the desoldering gun and soldering iron
simultaneously, the smoke absorbing function of the
soldering iron will be deactivated. This is to give priority to
the desoldering gun.
OPERATING GUIDELINES
15
F. Hot Air Gun Safety Feature
The systems’ hot air gun has a safety feature to limit the
temperature rise to no more than 3 degrees per second. The 3 degrees
per second limit is an industry standard recommendation to minimize
component damage due to a rapid increase of temperature. This
protection feature is activated by default and can be deactivated if
desired. Below are the procedures on activation/deactivation of this
safety feature:
1. Turn “OFF” system and ensure all function switches are in “OFF”
position.
2. Press and hold this two buttons. The Hot Air Gun Automate
Function Selector (“17” from the control panel) and the UP
button of the DESOLDER GUN TEMPERATURE adjustment
button.(“5” from the control panel) .
3. With the two buttons held in the pressed position turn
“ON” the system by switching the Main Power Switch (“10”).
4. Release the buttons when “SAFE OFF ” appears on the Hot Air
Gun Temperature Display/Hot Air Gun Airflow Display . Release
the buttons when this is displayed.
5. The display below the word “SAFE” will indicate whether the
safety feature in “On” or “OFF” by displaying the corresponding
word on the Hot Air Gun Airflow Display The system will
proceed to standby mode.
6. To switch the safety feature “On” or “OFF” simply repeat steps 1
to 5.
7. The Status of the safety feature shall remain in effect until it is
manually changed by following procedure 1 to 5.
OPERATING GUIDELINES
Loading ...
Loading ...
Loading ...