Loading ...
Loading ...
Loading ...
2. Battery Charger (optional accessories)
Model UC18YSL3 UC18YFSL
Input power source Single phase: AC 120 V 60 Hz
Charging time
(At a temperature of 68°F (20°C))
BSL1860 : Approx. 38 min BSL1830C : Approx. 45 min
Charging voltage DC 14.4–18 V
Charging current DC 8.0 A DC 3.5 A
Weight 1.3 lbs. (0.6 kg) 1.1 lbs. (0.5 kg)
NOTE: The charging time may vary according to temperature and power source voltage.
Electronic control
Soft-start
Overload protection
This protection feature cuts o the power to the motor
in the event of overloading of motor or a conspicuous
reduction in rotational speed during operation.
When the overload protection feature has been
activated, the motor may stop.
In this case, release the tool switch and eliminate
causes of overloading.
After that you can use it again.
Overheat protection
This protection feature cuts o the power to the motor
and stops the power tool in the event of overheating of
motor during operation.
When the overheat protection feature has been
activated, the motor may stop.
In this case, release the tool switch and cool it down in
a few minutes.
After that you can use it again.
Rotation speed changeover function (Power mode /
Silent mode)
(Power mode / Silent mode switch function)
Each press of the Mode Selector Switch changes the
operating mode. (Fig. 5)
Mode selector switch
Silent mode indicator lamp
Fig. 5
Silent mode reduces maximum motor RPM enabling
e cient work with less noise.
The Silent Mode Indicator Lamp lights in Silent mode.
When the load increases during Silent mode, the tool
will automatically switch to Power mode and revert
back to Silent mode when the load decreases.
In Power mode, no change is made to Silent mode
even when the load decreases.
NOTE
To enable mode changes, pull the switch once after
installing the battery.
Do not give a strong shock to the switch panel or
break it. It may lead to a trouble.
11
English
00BookC18DBALNAmetabo.indb1100BookC18DBALNAmetabo.indb112021/03/3017:20:572021/03/3017:20:57
Loading ...
Loading ...
Loading ...