Loading ...
Loading ...
Loading ...
30 31
• Coffee has been compressed too much
Solution:
• Add water to water reservoir.
• Grind coffee less ne.
• Fill portalter following instructions on “espresso grounds prep”.
• Plug in power cord.
• Rell portalter with espresso ground coffee and GENTLY
press down.
Problem: Espresso comes out too quickly
Possible Causes:
• Coffee is ground too coarse
• Not enough coffee in the portalter
Solution:
• Use a ner grind of espresso coffee.
• Follow How to Brew Espresso instructions carefully paying close
attention to measurements for coffee.
Problem: Milk is not foamy after frothing
Possible Causes:
• Not enough water in water reservoir to steam
• Milk is not cold
• Using whole milk
Solution:
• Follow the “How to Froth” instructions (starting on page 21)
paying close attention to the water measurements.
• Use cold milk to froth.
• For best results, use 2% or skim milk.
Problem: Coffee comes out around the edge of the portalter
Possible Causes:
• Portalter not rotated to lock position
• Coffee grounds around edge of lter
• Too much coffee in the lter
• All pressure was not released
• Portalter removed too fast
Solution:
• Rotate portalter to lock position.
• Wipe off excess grounds from rim of portalter.
• Put less coffee in the lter.
• Follow instructions on how to release pressure on page 8
• Slowly remove portalter
Problem: Portalter changed color
Possible Causes:
• Dishwasher
Solution:
• It is still safe to use. We do not recommend putting it in the dishwasher.
Problem: Milk sucked in the machine through the frothing wand
Possible Causes:
• Not enough water to froth / steam in the water reservoir
Solution:
• You should hear the steam coming out. If it is silent, remove the
frothing wand from the milk. Then, follow frothing instructions on
“how to froth milk” (Starting on page 21).
Do you still have questions? You can call us toll-free at the MR. COFFEE®
Consumer Service Department, 1-800-MR COFFEE (1-800-672-6333) or
you can visit us at www.mrcoffee.com.
Loading ...
Loading ...
Loading ...