Loading ...
Loading ...
Loading ...
Installation Instructions
[] ELECTRICAL CONNECTIONS (CONT.)
B. Usage Situations where Appliance Power Cord will
be Disconnected Frequently.
Do not use an adapter plug in these situations because
disconnecting of the power cord places undue strain on
the adapter and leads to eventual failure of the adapter
ground terminal. The customer should have the two-
prong wall receptacle replaced with a three-prong
(grounding) receptacle by a qualified electrician before
using the appliance.
The installation of appliances designed for mobile home
installation must conform with the Manufactured Home
Construction and Safet U Standard, Title 24 CFR,Part
3280 (formerlg the Federal Standard for Mobile Home
Construction and Safety, Title 24, HUD, Part 280) or,
when such standard is not applicable, the Standard
for Manufactured Home Installations, latest edition
(Manufactured Home Sites, Communities and Set-Ups),
ANSIA225.1, latest edition, or with local codes. In
Canada, mobile home installation must be in
accordance with the current CAN/CSAZ240/MH
Mobile Home Installation Code.
Electric Disconnect
• Locate disconnect plug on the range back.
• Pinch sides of connector and pull out of range back.
[] SEAL THE OPENINGS
Sealang openings in the wall behind the range and in the
floor under the range when hookups are completed.
[] ASSEMBLE SURFACE BURNERS
[] Burner Heads
Place burner heads over the electrodes on the cooktop,
in the correct locations according to their size. There is
one small, one medium, one large and one extra large
burner head.
Mediume_head _d
L_argeneaa u Extra
Front of range large head
42
[] ASSEMBLE SURFACE BURNERS (CONT.)
Make sure the
slot in the burner
head is positioned
overthe I---_ I
electrode. _
Electrode_ _"Slot
[]
Oval {Center) Burner Head/Cap Assemblg
(on some models)
Placethe oval (center) head/cap assemblg over the
electrode on the cooktop.
Oval head and cap
assemblg
Make sure the slot in the
burner head is positioned
over the electrode.
Front of range Electrode
[] Caps
Placethe matching size caps onto the burner bases
or heads.
Front of range large cap
Makesure that the heads and caps are replaced in the
correct locations.
[] Grates
Placethe left, right and center grates on the cooktop.
Thesegrates are position specific.The undersides of
the left and right grates are marked "LEFTFRONT"and
"RIGHTFRONT."Placethe middle grate with its bowed
front toward the front of the range.
Left Front Center Right Front
CAUTION: Do not operate the burner
without all burner parts in place.
Loading ...
Loading ...
Loading ...