Loading ...
Loading ...
Loading ...
Installation Instructions
-AWARNING!
INSTALLATIONSAFETY
INSTRUCTIONS
Read these instructions completelg and carefullg.
Improper installation, adjustment, alteration, service
or maintenance can cause injurg or propertg damage.
Refer to this manual. For assistance or additional
information, consult a qualified installer, service
agencg, manufacturer {dealer) or the gas supplier.
Never reuse old flexible connectors. The use of old flexible
connectors can cause gas leaks and personal injurg.
Alwags use NEW flexible connectors when installing a gas
appliance.
IMPORTANT - emoveallpacking material
and literature from oven before connecting gas and
electrical supplg to range.
CAUTION - oo not attempt to operate the oven
of this range during a power failure (ElectricIgnition models
onlg).
• Have gour range installed bg a qualified installen
• Your range must be electricallg grounded in accordance
with local codes or, in the absence of local codes, in
accordance with the National Electrical Code (ANSI/NFPA
70, latest edition). In Canada, electrical grounding must
be in accordance with the current CSAC22.1 Canadian
Electrical Code Part :]_and/or local codes. SeeElectrical
Connections in this section.
• Before installing gour range on linoleum or ang other
sgnthetic floor covering, make sure the floor covering
can withstand 180°Fwithout shrinking,warping or
discoloring. Do not install the range over carpeting
unlessa sheet of 1/4" thick plgwood or similar insulator
is placed between the range and carpeting.
• Make sure the wall coverings around the range can
withstand heat generated bg the range up to 200°R
Avoid placing cabinets above the range. To reduce the
hazard caused bg reaching over the open flames of
operating burners, install a ventilation hood over the
range that projects forward at least 5" begond the front
of the cabinets.
• Theventilating hood must be constructed of sheetmetal
not lessthan 0.0122" thick. Install above the cooktop with
a clearance of not lessthan 1/4" between the hood and
the underside of the combustible material or metal
cabinet. The hood must be at least as wide as the
appliance and centered over the appliance.Clearance
between the cooking surface and the ventilation hood
surface MUSTNEVERBELESSTHAN 24 INCHES.
EXCEPTION:Installation of a listed microwave oven or
cooking appliance over the cooktop shall conform to the
installation instructions packed with that appliance.
• If cabinets are placed above the range, allow a minimum
clearance of 30" between the cooking surface and the
bottom of unprotected cabinets.
• If a 30" clearance between cooking surface and
overhead combustible material or metal cabinets cannot
be maintained, protect the underside of the cabinets
above the cooktop with not lessthan 1/4" insulating
millboard covered with sheet metal not less than 0.0122"
thick. Clearance between the cooking surface and
protected cabinets MUSTNEVERBELESSTHAN
24 INCHES.
The vertical distance from the plane of the cooking
surface to the bottom of adjacent overhead cabinets
extending closer than 1" to the plane of the range sides
must not be lessthan 18". (Seethe Dimensionsand
Clearances illustration in this section.)
CAUTION - Items of interest to children should
not be stored in cabinets above a range or on the
backsplash of a range-children climbing on the range
to reach items could be seriouslg injured.
35
Loading ...
Loading ...
Loading ...